Filter
Top Products
-- 4 --
D Make sure the unit is properly assembled
and in good operating condition.
D Do not fill fuel tank while engine is hot or
running.
D Avoid spilling fuel or oil. Wipe up fuelspills
before starting engine.
D Move atleast 10feet (3 meters) away from
fuel and fueling site before starting engine.
D Always store gasoline in a container ap-
proved for flammable liquids.
OPERATE YOUR UNIT SAFELY
WARNING: Stop the engine before
opening the vacuum inlet door. The engine
must be stopped and the impeller blades no
longer turningtoavoid serious injury fromthe
rotating blades.
D Inspect unit before each u se for worn,
loose, missing, or damaged parts. Do not
use until unit is in proper working order.
D Keep outside surfaces free of oil and fuel.
D Never start or run engine inside a closed
room, building or other unventilated area.
Breathing exhaust fumes can kill.
D To avoid static electricity shock, do not
wear rubber gloves or any other insulated
gloves while operating unit.
D Do not set unit on any surface except a
clean, hard area while engine is running.
Debris such as gravel, sand, dust, grass,
etc.couldbepickedupby theairintakeand
thrown out through discharge opening,
damagingunit,property,orcausingserious
injury to bystanders or operator .
D Avoiddangerousenvironments.Donotuse
in unventilated areas or where explosive
vapors or carbon monoxide build up could
be present.
D Do notoverreach orusefrom unstablesur-
faces such a sladders, trees, steepslopes,
rooftops,etc.Keepfirmfootingandbalance
at all times.
D Never place objects inside the blower
tubes; always direct the blowing debris
awayfrompeople,animals,glass,andsolid
objects such as trees, automobiles, walls,
etc.Theforceofaircancauserocks,dirt,or
sticks tobe thrownor toricochet whichcan
hurt people or animals, break glass, o r
cause other damage .
D Never run unit without the proper equip-
ment attached. When using your unit asa
blower,always installblower tubes. When
usingyourunitas avacuum,alwaysinstall
vacuumtubesandvacuumbagassembly.
Makesurevacuumbagassembly iscom-
pletely zipped.
D Check air intake opening, blower tubes,
vacuumtubes, and elbowtube frequently ,
always with engine stopped and spark
plug disconnected. Keep vents and dis-
charge tubes free of debris which can ac-
cumulate and restrict proper air flow.
D Never p lace any object i n the air intake
opening as this could restrict proper air flow
and cause damage to the unit.
D Never use for spreading chemicals, fertil-
izers,orothersubstanceswhichmaycon-
tain toxic materials.
D To avoid spreading fire, do not use near
leaf or brush fires, fireplaces, barbecue
pits, ashtrays, etc.
D Useonly forjobs explainedinthis manual.
MAINTAIN YOUR UNIT PROPERLY
D Have all maintenance other than the rec-
ommendedprocedures described inthein-
struction manual performed by an autho-
rized service dealer.
D Disconnect spark plug bef ore performing
maintenance except for carburetor adjust-
ments.
D Use only recommended Poulan PRO re-
placement parts; use of any other parts
mayvoidyourwarranty andcausedamage
to your unit.
D Empty fuel tank before storing the unit. Use
upfuelleftincarburetor bystarting engineand
letting it run until it stops.
D Do not use any accessory or attachment
other than those recommended by manufac-
turer for use with your unit.
D Do notstoretheunit orfuel inaclosedarea
where fuel vapors can reach sparks or an
open flamefrom hotwater heaters, electric
motors or switches, furnaces, etc.
D Store in adry area out ofreach of children.
SPECIAL NOTICE: Exposure to vibra-
tions throughprolonged useof gasoline pow-
ered hand tools could cause blood vessel or
nerve damage in the fingers, hands, and
joints of people proneto circulation disorders
or abnormal swelling. Prolonged use in cold
weatherhas beenlinkedtobloodvesseldam-
agein otherwise healthypeople.Ifsymptoms
occur such a s numbness, pain, loss of
strength, change in skin color or texture, or
loss of feeling in the fingers, hands, or joints,
discontinue the use of this tool and seek
medical attention. An antivibration system
does not guarantee the avoidance of these
problems.Users who operatepower tools on
a continual and regular basis must m onitor
closelytheirphysicalconditionand thecondi-
tion of this tool.
SPECIAL NOTICE:For users on U.S. For-
est Land and in some states, including Cali-
fornia (Public Resources C odes 4442 and
4443),Idaho,Maine,Minnesota,NewJersey,
Oregon, and Washington: Certain internal
combustion engines operated on forest,
brush,and/orgrasscoveredlandintheabove
areas are required to be e quipped with a
spark arresting screen, maintained in effec-
tiveworkingorder,ortheenginemustbecon-
structed, equipped, and maintained for the
preventionof fire.Check withyourstate o rlo-
cal authorities for regulations pertaining to
these requirements. Failure to follow these
requirements isaviolationofthelaw.Thisunit
is not factory equippedwitha spark arresting
screen; however,a spark arresting screen is
availableas anoptionalpart.Ifaspark a rrest-
ing screen is required in your a rea, contact
your authorized service dealerfor thecorrect
kit. Thespark arrestingscreen, blowertubes,
and nozzles must be assembled to unit to be
in full compliance with regula ti ons.