Filter
Top Products
5
OPERATION
KNOW YOUR TRIMMER
READ THI SINSTRUCTION M ANUALAND SAFETYRULESBEFOREOPERATINGYOURUNIT.
Compare the illustrations with your unit to f amiliarize yourself with the location of the various controls
and adjustments. Save this manual for future reference.
Cord
Retainer
Recessed
Plug
Trigger Switch
Assist Handle
Twist and Edge Button
Motor Housing
Edge Guide
Line Limiter Blade
Trimmer Head
with 0.065 inch
Trimmer Line
Debris Shield
Air Vents
RECESSED PLUG
The RECESSED PLUG is where you attach
your extension cord to the unit.
TRIGGER SWITCH
TheTRIGGERSWITCHisusedtoturnonthe
unit.Squeezethet riggerswitchtooperatethe
unit. Release to stop.
LINE LIMITER BLADE
The LINE LIMITER BLADE cuts the cutting
line to the proper cutting length.
ASSIST HANDLE
The ASSIST HANDLE is used to help hold
and guide the unit.
TRIMMER HEAD
The TRIMMER HEAD holds the cutting line
and rotates during operation.
TWIST AND EDGE BUTTON
TheTWIST AND EDGE BUTTON is used to
twist the lower portion ofthe unit into an edg-
ing position.
EDGE GUIDE
TheEDGEGUIDEprotects theunitfromcon-
tacting the ground during edging.
OPERATING INSTRUCTIONS
Use only a voltage supply as specified on
your unit.
SELECT AN EXTENSION CORD
ExtensionCordGaugeChart
Length of Cord Gauge
25 Ft. (7.5 m)
50 Ft. (15 m)
100Ft.(30m)
18 Gauge
16 Gauge
16 Gauge
Extension cords are available for this unit.
AT TACH THE EXTENSION
CORD TO YOUR TRIMMER
Loop your extension cord throughthehandle
and around the hook as shown. Insure the
plug and cord are f irmly and fully engaged.
Cord Retainer
Extension Cord
CORRECT OPERATING POSITION
Trimming
Edging
WARNING: Alwayswear eyeprotec-
tion. Never lean over the trimmer head.
Rocksordebris canricochetorbethrowninto
eyes and face and cause blindness or other
serious injury.