Filter
Top Products
12
ASSEMBLY
INSTALLING WHEEL ASSEMBLY
See Figure 5.
■ Locate the following items:
2 wheels
2 square curved washers (14)
2 flat washers (4)
2 hex nuts (11)
2 nuts (6)
■ Slide wheel over axle extension.
■ Slide flat washer on axle extension.
■ Install hex nut on axle extension and tighten to
secure.
■ Repeat for second wheel.
NOTE: Block up frame securely with wood blocks to
provide clearance for frame bolts & wheel assembly.
■ Slide square curved washer, curved side down,
on bolt.
■ Place on frame and slide bolt through frame
hole.
■ Repeat for second bolt.
■ Lift axle and align hole with installed frame bolts.
■ Install nuts on 2 bolts and tighten to secure
INSTALLING FOOT ASSEMBLY
See Figure 6.
■ Locate the following items:
2 foot supports (12)
6 bolts (13)
NOTE: Block up frame securely with wood blocks to
provide clearance for foot support assembly.
■ Align foot support with 3 holes in frame cross member.
■ Insert 3 bolts into welded nuts on foot support.
■ Tighten bolts to secure
■ Repeat for second foot.
Fig. 6
Fig. 5