Filter
Top Products
5
OPERATION
KNOW YOUR HEDGE TRIMMER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERA T ING YOUR
HEDGE TRIMMER A TT ACHMENT. Compare the illustrations with your attachment to familiarize
yourself with the location of the various controls and adjustments. Save this manual for future refer-
ence.
Angle Adjustment Track
Shaft
Fixed Screw
Blade
Angle
Adjustment
Holder
BLADE
The BLADE is designed to cut hedges.
ANGLE ADJUSTMENT HOLDER
The ANGLE ADJUSTMENT HOLDER is
used to adjust the angleof the hedge trimmer
to suit the area you are trimming.
OPERATING THE COUPLER
Your powerhead is equipped with a coupler
which enables optional attachments to be
installed. The optional attachments are:
MODEL:
Edger PP1000E.....................
Cultivator PP2000T..................
Blower PP3000B....................
Pruner PP5000P....................
Pruner PP5500P....................
Brushcutter* PP4000C...............
*not designed for use with electric powerheads
WARNING: Always disconnect pow-
erhead spark plug(or disconnect powerhead
frompowersource) beforeremoving orinstal-
ling a ttachments.
REMOVING ATTACHMENT
CAUTION:
When removing or installing at-
tachments, place the powerhead and attach-
ment on a flat surface for stability.
1. Loosen the coupler by turning the knob
counterclockwise.
Coupler
Knob
LOOSEN
TIGHTEN
Upper Shaft
Lower
Attachment
2. Press andholdthe locking/releasebutton.
L
ocking
/
Release
Button
Coupler
Upper Shaft
Lower Attachment
3. While securely holding the upper shaft,
pull theattachment straight outof the cou-
pler.