Filter
Top Products
5
OPERATION
KNOW YOUR CULT IVATOR ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERA TING YOUR
CUL TIV A T OR ATT ACHMENT. Compare the illustrations with your attachment to familiarize yourself
with t he location of the various controls and adjustments. Save this manual for future reference.
Cutting Tines
Shaft
Hanger
Tine Guard
CUTTING TINES
TheCUTTINGTINESaredesignedtoloosen
soil.
NOTE: The cutting tines can not be turned
by hand due to the gear ratio.
TINE GUARD
TheTINE GUARDprovides partialprotection
from the rotating tines.
OPERATING THE COUPLER
Your powerhead is equipped with a coupler
which enables opti onal attachments to be
installed. The optional attachments are:
MODEL:
Edger PPB1000E......................
Blower PPB3000B.....................
Pruner PPB5000P.....................
Pruner PPB5500P.....................
Brushcutter* PPB4000C................
*not de signed for use with electric powerheads
WARNING: Always disconnectpow-
erheadspark plug (or disconnect powerhead
frompowersource)beforeremovingorinstal-
ling attachments.
REMOVING ATTAC HMENT
CAUTION:
When removing or installingat-
tachments, place the powerhead andattach-
ment on a flat surface for stability.
1. Loosen the c oupler by turning the knob
counterclockwise.
Attachment
Coupler
Knob
LOOSEN
TIGHTEN
2. Pressandholdthelocking/releasebutton.
Locking/Release
Button
Coupler
Upper Shaft
Attachment
3. While securely holding the upper shaft,
pulltheattachment straight outofthecou-
pler.