Filter
Top Products
19
SERVICE AND ADJUSTMENTS
D
C
G
E
F
M
L
K
R
Q
A
P
G
B
on rear mower bracket and secure with washer and
retainer spring.
• ATTACH FRONT LINK (E) - Work from left side of trac-
arm (R).
• Push clutch cable housing guide (P) into bracket, slide
collar (L) onto guide and secure with retainer spring (K).
• Install belt on engine pulley (M), in belt keepers (G).
IMPORTANT: CHECK BELT FOR PROPER ROUTING
IN ALL MOWER PULLEY GROOVES.
• Raise attachment lift lever to highest position.
• If necessary, adjust gauge wheels before op er at ing
mower as shown in the Operation section of this
manual.
E
F
H
J
A
B
tor. Insert rod end of link assembly through front hole
in tractor front suspension bracket (F).
• Insert end of link (E) into hole in front mower bracket
and secure with washer and retainer spring (J).
• Hook end of clutch cable spring (Q) into hole in idler
FIG. 18
FIG. 19
FIG. 20
C
D
FIG. 21