Poulan P4018WT Chainsaw User Manual


 
4
S Pinch-Kickback can occur when the t he
wood closes in and pinches the moving
saw chain in the cut along the top of the
guide bar and the saw chain is suddenly
stopped. This sudden stopping of the
chain results in a reversal of the chain
force used to cut wood and causes the
sawtomoveintheoppositedirectionofthe
chain rotation. The saw is driven s traight
back t oward the operator.
S Pull-In can occur when the moving chain
contacts a f oreign object in the wood in the
cut alongthe bottom ofthe guidebar and the
saw chain is suddenly stopped. This sudden
stopping pulls the saw forward and away
from theoperator and couldeasily cause t he
operator to lose c ontrol of the saw .
Avoid Pinch--Kickback:
S Be extremely aware of situations or ob-
structions thatcan causematerial topinch
the top of or other wise stop the chain.
S Do not cut more than one log at a time.
S Do not twist the saw as the bar is with-
drawn from an undercut when bucking.
Avoid Pull--In:
S Always begincuttingwith theengineatfull
speed andthesaw housingagainst wood.
S Use wedges made of plastic or wood.
Never use metal to hold the cut open.
Kickback Path
Clear The
Working Area
Avoid Obstructions
REDUCE THE CHANCE OF
KICKBACK
S Recognize that kickback can happen.
With a basic understanding of kickback,
you can reduce the element of surprise
which contributes to accidents.
S Neverletthemovingchaincontactanyob-
ject at the tip of the guide bar.
S Keep the w orking area free from obstruc-
tionssuchasothertrees,branches,rocks,
fences, stumps, etc. Eliminate or avoid
any obstruction that your saw chain could
hit w hile you are cutting. When cutting a
branch, do not let the guide bar contact
branch or other objects around it.
S Keep your saw chain sharp and properly
tensioned. A loose or dull chain can in-
crease the chance of kickback occurring.
Follow manufacturer’s chain sharpening
andmaintenanceinstructions. Checkten-
sion at regular intervals with the engine
stopped, never with the engine running.
Make sure the bar nuts are securely tight-
ened after tensioning the chain.
S Begin andcontinuecuttingat fullspeed. If
the chain is moving at a slower speed,
there is greaterchance ofkickbackoccur-
ring.
S Cut one log at a time.
S Use extreme caution when re-entering a
previous cut.
S Do not a ttempt cuts starting with the tip of
the bar (plunge c uts).
S Watch for shifting logs or other forces that
could close a cut and p inch or fall into chain.
S Use the Reduced--Kickback Guide Bar
and Low--Kickback Chain specified for
your s aw.
MAINTAIN CONTROL
Never reverse
hand positions
Stand to the
left of the saw
Thumb on
underside of
handlebar
Thumb on underside of
handlebar
Elbow locked
S Keep a good, fi rm grip on the s aw with both
hands w hen the engine is running and don’ t
let go. A firm grip will help you r educe kick-
back and maintain control of the s aw . Keep
the fingers of your left hand encircling and
your left thumb under the front handlebar .
Keep your right han d completely around t he
rear handlewhetheryour areright handedor
left handed. Keep your left arm straight with
the e lbow locked.
S Positionyourlefthandonthe fronthandle-
bar so it is in a straight line with your right
hand on the rear handle w hen making
bucking cuts. Never reverse right and left
hand positions for any type of cutting.
S Standwithyourweightevenlybalancedon
both feet.
S Stand slightly tothe left side of the saw to
keep your body from being in a direct line
with the cutting chain.
S Do not overreach. You could be drawn or
thrown off balance and lose control of the
saw.
S Donotcutaboveshoulderheight. I tisdiffi-
cult to maintain control of saw above
shoulder height.