Filter
Top Products
6
Computed kickback angle (CKA) Table
BAR
P/N Length
CHAIN P/N
16″
MODEL
ES350
30_
952044370 952051211
CKA without
chain brake
ES350WT 952044370 16″ 952051211 30_
SAFETY NOTICE: Exposure to vibra-
tions through prolonged use of hand
tools cou ld cause blood vessel or nerve
damage inthe fingers,hands, and joints
of people prone to circulation disorders
or abnormal swelling. Prolonged use in
cold weather has been linked to blood
vessel damage in otherwise healthy
people. If symptoms occur s uch as
numbness, pain, loss of s trength,
change ins kin coloror texture,or lossof
feeling in the fingers, hands, or joints,
discontinue the use ofthis tool and seek
medical attention. An anti-vibration sys-
tem does not guarantee the avoidance
of these problems. Users who operate
power tools on a continual and regular
basismustcloselymonitortheirphysical
condition and the condition of this tool.
DOUBLE INSULATI ON
CONSTRUCTIO N
This unit is double insulated to help pro-
tect against electric shock. Double in-
sulation construction consists of two
separate “layers” of electrical insulation
instead of grounding.
Toolsbuiltwiththisinsulationsystemare
not intended to be grounded. No
grounding means is provided on this
unit, nor should a means of grounding
be added to this unit.
Safety precautions must be observed
when operating any electrical tool. The
double insulation system only provides
addedprotectionagainst injuryresulting
from an internal electrical insulation
failure.
WARNING: A ll electr ical repai r s to
this unit , i ncl uding housing, swit ch, motor,
etc., must be diagnosed and repaired by
qualif i ed ser vi ce per sonnel. Replacement
parts for a double insulated appliance
mustbe i den tica lto t hepart s th eyrepl ace.
A double insulated appliance is mar ked
wit h the words “ double insulati on” or
“double i nsulat ed” . T he symbol
(square wi t hi n a square) may also be
marked on the appliance. Fail ur e to have
the unit repaired by authori zed service
personnel can cause the double insula-
tion construction to become ineffective
and result in serious injury .
STA NDA RDS: This product is listed by
UnderwritersLaboratories,Inc.inaccor-
dance with UL Standard 1662 and CSA
Standards Z62.1 and Z62.3 and ANSI
B175.1.
ANSI B175. 1--2000 “American National
St an da rd fo r Powered Too ls -- Safety Re-
quir ements”
CSA Z62.3 “Chain Saw Kickback Occu-
pational Health and Safety”
CSA Z62.1 “Chain Saws -- Occupati onal
Health and Safet y”
SAV E THESE INSTRUCTI ONS
ASSEMBLY
WARNING: Before using cha in
saw, ensure all fasteners are secure.
CARTON CONTENTS
S Chain Saw (fully assembled)
S Bar Sheath
Examine part s for damage. Do not use
damaged part s.
NOTE: Ifyouneedassistanceorfind
that parts are missing or damaged,
please call 1-800-554-6723.
ASSEMBLY
Your unit is fully assembled; no assembly
is required.