Poulan 952711951 Brush Cutter User Manual


 
15
S Never place objects inside the blower tubes,
vacuum tubes or blower outlet. Always d irect
the blowing debris away from people,
animals, g lass, and solid objects such as
trees, automobiles, walls, etc. The force ofair
cancauserocks,di rt ,orsticks tobe thr o wnor
to ricochet which can hurt people o r animals,
break glass, or cause other damage.
S Never run unit without the proper
equipment attached. When using your unit
as a blower, always install blower tubes.
S Check air intake opening, blower tubes or
vacuum tubes frequently, always with
engine stopped and spark plug
disconnected. Keep vents and discharge
tubes free of debris which can accumulate
and restrict proper air flow .
S Never place any object in air intake opening
as this could restrict proper air flow andcause
damage to the unit.
S Neveruse forspreading chemicals, fertilizers,
or other substances which may contain toxic
materials.
S Toavoid spreading f ire, donot usenear leaf or
brush fires, fireplaces, barbecue pits,
ashtrays, etc.
CULTIVATOR SAFETY
WARNING: Rotating tines can cause
serious injury. Keep away from rotating tines.
Stop the engine and disconnect the spark plug
before unclogging tines or making repairs.
WARNING: Inspect the area to be
cultivated beforestarting theunit. Removeall
debris and hard and sharp objects such as
rocks, vines, branches, rope, string, etc.
S Avoid heavy contact with solid objects that
might stop the tines. If heavy contact occurs,
stop the engine and inspect the unit f or
damage.
S Never operate the cultivator without the tine
co ver in place an d prope rly secu re d.
S Keep the tines and guard clear of debris.
S After striking a foreign object, stop the
engine, disconnect the spark plug and
inspect the cultivator for damage. Repair
before restarting.
S Disconnect attachment from the drive engine
before cleaning the tines with a hose and
water to remove any build--up. Oil the tines to
prevent rust.
S Always w ear gloves when servicing or
cleaning the tines. The tines become very
sha rp fro m use.
S Do not run unit at high speed unless
cultivating.
HEDGE TRIMMER SAFETY
DANGER: RISK OF CUT; KEEP
HANDS A WAY FROM BLADE -- B lade m o ve s
momentarily after the trigger is released or the
engine is turned off. Do not attempt to clear
away cut material when the blade is in motion.
Make sure engine is stopped, the spark plug
wire isdisconnected, andthe bladehas stopped
moving before removing jammed m aterial from
the cutting blade. Do not grabor holdthe unitby
the cutting blade.
WARNING: Inspect the area before
starting the unit. Remove all debris andhard
objects such as rocks, glass, wire, etc. that
can ricochet, be thrown, or otherwise cause
injury or damage during operation.
S Do not use a cutting blade that is bent,
warped, cracked, broken or damaged in any
other way. Have worn or damaged parts
replaced by an authorized service dealer .
S Always keep unit in front of your body.
Keep all parts of your body away from the
cutting blade.
S Keepthe cuttingbladeand airvents clearof
debris.
POLE PRUNER SAFETY
WARNING: The reciprocating blade/
rotating chain can cause severe injury. In-
spect the unitbefore use. Do notoperate unit
with abent,cracked ordullbladeor d ullchain.
Keep away from the blade/chain.
WARNING: The reciprocating blade/
rotating chain is sharp. Do not to uch. Topre-
vent serious injury, always stop engine and
ensure blade/chain has stopped moving, dis-
connect spark plug, and wear gloves when
changing or handling the blade or chain.
WARNING: A coasting blade/rotat-
ingchaincancauseinjury whileit continuesto
move after the engine is stopped. Maintain
proper control of the unit until the blade/chain
has completely stopped moving. Keep
hands, face and feet at a distance from all
moving parts. Do notattempt totouch orstop
the blade or chain when it is moving.