Filter
Top Products
14
Inside view of
Bar Clamp
Adjusting
screw
Adjusting pin
Adjusting pin hole
8. Sec ure the guide bar and bar clamp
with the bar clamp n uts; tighten
finger tight only.
CAUTION : I f saw chain is i nstal l ed back-
ward s, t he saw will vibrat e exce ssively
and wi ll not cut wood.
CHAIN ADJUSTM ENT
See
CHECK CHAIN TENSION in the MAIN-
TENANCE
section.
CUSTOMER SERVICEABLE PARTS
WARNING: Use of any other ac-
cessory or attachment might present a
risk of injury to the operator.
REPLACEMENT PART PART NO.
Hex Nuts 530015917
Oil Cap 530053072
Bar Adjusting Screw 530016265
Bar Adjusting Pin 530053068
File (5/32″ dia.) Twin Pak 9520 55085
Xtra GUARDr Chain --16″ 952051470
Lo--Kickr Guide Bar -- 16″ 952044759
Bar & Chain Lubricant --1 qt. 952030129
Bar & Chain Lubricant --1 gal. 952030130
STORAGE
WARNING: Perform the following
steps after each use:
S Allow motor to cool before storing or
transporting.
S Store chain sawand extension cord in
a well ventilated area
S Store chain saw with all guards in
place and position chain saw so that
any sharp object cannot accidentally
cause injury.
S Storec hains aw unplugged,welloutof
the reach of children.
SEASONAL STORAGE
Prepare your unit for storage at t he end of
the season or if it wil l not be used for 30
days or more.
If your chai n saw is to be st ored for a
peri od of time:
S Clean it thoroughly before lengthy
storage.
S Store in a clean dry area.
S Lightly oil external metal surfaces and
guide bar.
S Oil the chain and wrap it in heavy
paper or cloth.