Filter
Top Products
-- 5 --
OPERATION
KNOW YOUR BLOWER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
BLOWERATT ACHMENT. Comparetheillustrationswithyourunittofamiliarizeyourselfwiththe
location of the various controls and adjustments. Save this manual for future reference.
Air Intake Opening
Blower Discharge
Opening
Hanger
Shaft
OPERATING THE COUPLER
Your powerhead is equipped with a coupler
which enables opti onal attachments to be
installed. The optional attachments are:
MODEL:
Edger PP1000E......................
Cultivator PP2000T...................
Pruner PP5000P.....................
Pruner PP5500P.....................
Brushcutter* PP4000C................
*not designed for use with electric powerheads
WARNING: Always disconnect pow-
erheadspark plug (or disconnect powerhead
frompowersource)beforeremovingorinstal-
ling attachments.
REMOVING ATTACHMENT
CAUTION:
When removing or installingat-
tachments, place the uniton aflat surface for
stability.
1. Loosen the coupler by turning the knob
counterclockwise.
Attachment
Coupler
Knob
LOOSEN
TIGHTEN
2. Press a nd hold the locking/release b utton.
Locking/Release
Button
Coupler
Upper Shaft
Attachment
3. While securely holding the upper shaft,
pull the attachment straight out of the
coupler.