Poulan 545137250 Chainsaw User Manual


 
3
gloves; eye protection such as non-fog-
ging, vented goggles or face screen; an
approvedsafetyhardhat;andsoundbarri-
ers (ear plugs or mufflers) to protect your
hearing. Regularusersshouldhavehear-
ing checked regularly as chain saw noise
can damage hearing. Secure hair above
shoulder length.
Snug
Fitting
Clothing
Safety
Shoes
Safety Chaps
Heavy Duty
Gloves
Eye
Protection
Hearing
Protection
Safety Hat
S Keep all parts of your body away from the
chain when the engine is running.
S Keep children, bystanders, and animals a
minimumof 30feet(10meters) awayfrom
the work area. D o not allow other people
or animals to benear the chain saw when
starting or operating the chain saw.
S Do not handle or oper ate a c hain saw when
you are fatigued, ill, or upset, o r i f you ha ve
taken alcohol, d rugs, o r medication. You
must bein goodphysical condition andmen-
tally alert. Chain saw work is strenuous. If
you ha ve any condition th at m ight b e a ggra-
vated by strenuous work, check with your
doctor before o pe rating a chai n saw.
S Carefullyplanyoursawingoperationinad-
vance. Donotstartcuttinguntilyouhavea
clearworkarea,securefooting,and,ifyou
are felling trees, a planned retreat path.
OPERATE YOUR SAW SAFE LY
S Donotoperateachain sawwith o nehand.
Serious injury tothe operator, helpers, by-
standers or any combination oftheseper-
sons may r esult from one-handed opera-
tion. A chain saw is intended for
two-handed use.
S Operatethechainsaw onlyin awell-venti-
lated outdoor area.
S Donotoperate sawfromaladder orinatree.
S Makesure thechain will notmakecontact
with any object while starting the engine.
Never try to start the saw when t he guide
bar is in a cut.
S Do notput pressure onthe saw at th e endof
the cut. Applying pressure can cause you t o
lose control when the cut i s completed.
S Stop the engine before setting the saw
down.
S Do not operate a chain saw that is dam-
aged, improperly adjusted, or not com-
pletely a nd securely assembled. Always
replace bar, ch ain, hand guard, or chain
brakeimmediately ifit becomesdamaged,
broken or is otherwise removed.
S With the engine stopped, hand carry the
chain sawwiththe muffleraway fromyour
body , and the guide bar and chain to the
rear, preferably covered with ascabbard.
MAINTAIN YOUR SAW IN GOOD
WORKING ORDER
S Haveallchainsawserviceperformedby a
qualifiedservice dealerwith theexception
oftheitems listed in the maintenance sec-
tionofthismanual. Forexample,ifimprop-
er toolsare u sedtoremove orhold thefly-
wheelwhenservicingtheclutch,structural
damage to the flywheel can occur and
cause the flywheel to burst.
S Make certain the saw chain stops moving
when the t h rottle trigger is r eleased. For
correction, refer to CARBURETOR AD-
JUSTMENT.
S Never modify your saw in any way.
S Keep thehandles dry,clean,andfree ofoil
or fuel mixture.
S Keep fuel and oil caps, screws, and f as-
teners securely tightened.
S Use only Poulan accesso ries a nd replace-
ment par ts as r ecommended.
HANDLE FUEL WITH CAUTION
S Do not smoke while handling f uel or while
operating the saw.
S Eliminateall sources of sparks or flamein
the areas where fuel is mixed o r poured.
Thereshould benosmoking,openflames,
orworkthat couldcausesparks. Allowen-
gine to cool before refueling.
S Mix and pour fuel in an outdoor area on
bare ground; store fuel in a cool, dry, well
ventilated place; and use an approved,
marked container for all fuel purposes.
Wipe up all fuel spills before starting s aw.
S Move atleast 10feet (3meters) fromfuel-
ing site before starting engine.
S Turn the engine off and let saw cool in a
non-combustible area, not on dry leav es,
straw, paper, etc. Slowly remove fuel cap
and refuel unit.
S Storetheunitandfuelinanareawherefuel
vapors cannot reach sparks or open
flamesfrom waterheaters,electricmotors
or switches, furnaces, etc.
KICKBACK
WARNING: Avoid kickback which
can result inserious injury. Kickback is the
backward,upwardorsuddenforwardmotion
of the guide bar occurring when the saw
chainnear theuppertip oftheguidebarcon-
tacts any object s uch as a logor branch, or
when the wood closes in and pinches the
saw chaininthecut.Contactin gaforeignob-
ject in the wood can also result in loss of
chain saw control.
S Rotational Kickbackcanoccur whenthe
moving chaincontacts anobjectattheup-
per tip of the guide bar. This contact can
cause the chain to dig into the object,
which stops the chain for an instant. The
result is a lightning fast, reverse reaction
which kicks the guide bar up and b ack to-
ward the operator.