Filter
Top Products
14
Cutters
Depth Gauge
Drive Links
6. Slide the chain between theh ousing
and the sprocket. Place chain
around the sprocket and fit the drive
links into the guide bar groove and
then around guide bar nose.
Right Housing
Bar
Sprocket
7. Hold the guide bar against the saw
frameand installthebar clampplate.
Be sure the tab on the bar clamp
plate is toward the rear of bar.
Bar
Clamp
Plate
Adjusting Pin Slot
Bar Nuts
Tab
8. Secure the guide bar and b ar clamp
plate with the bar nuts; tighten finger
tight only.
CAUTION: If saw chain is installed
backwards, the saw will vibrate exces-
sively and will not cut wood.
CHAIN ADJUSTMENT
See
CHECKCHAIN TENSIONin the MAIN-
TENANCE
section.
CUSTOMER SERVICEABLE PARTS
WARNING: Use of any other ac-
cessory or attachment might present a
risk of injury to the operator.
Bar Mounting Nuts 530015251
Oil Cap 530029282
Guide Plate 530029285
Safety Lock Button 530025873
Bar Adjusting Screw 530015514
Bar Adjusting Pin 530023492
Spacer 530015832
Spacer Screw 530015835
File (5/32″ dia.) Twin Pak 952055085
Xtra GUARD® Chain --14″ 952051209
Xtra GUARD® Cha in -- 1 6″ 95205121 1
Lo--Kick® Guide Bar -- 14″ 952044368
Lo--Kick® Guide Bar -- 16″ 952044370
Bar & Chain Lubricant --1 qt. 952030129
Bar & Chain Lubricant --1 gal. 952030130
REPLACEMENT PART PART NO.
STORAGE
WARNING: Perform the following
steps after each use:
S Allow the motor to cool be fore storing
or transporting.
S Store chain sawand extension cord in
a well ventilated area
S Store chain saw with all guards in
place and position chain saw so that
any sharp object cannot accidentally
cause injury.
S Storec hains aw unplugged,welloutof
the reach of children.
SEASONAL STORAGE
Prepare your unit for storage at the
end of the season or if it will not be
used for 30 days or more.
If your chai n saw is to be st ored for a
peri od of time:
S Clean it t hor oughly before lengthy stor-
age.
S Stor e in a clean dry area.
S Lightly oil external metal surfaces and
guide bar.
S Oil the chain and wrap it in heav y pa-
per or cloth.
S Use bar sheath to cover bar.