Poulan 420077 Portable Generator User Manual


 
12
ASSEMBLY
INSTALLING WHEEL ASSEMBLY
See Figure 5.
Locate the following items:
2 wheels
2 square curved washers (14)
2 flat washers (4)
2 hex nuts (11)
2 nuts (6)
Slide wheel over axle extension.
Slide flat washer on axle extension.
Install hex nut on axle extension and tighten to
secure.
Repeat for second wheel.
NOTE: Block up frame securely with wood blocks to
provide clearance for frame bolts & wheel assembly.
Slide square curved washer, curved side down,
on bolt.
Place on frame and slide bolt through frame
hole.
Repeat for second bolt.
Lift axle and align hole with installed frame bolts.
Install nuts on 2 bolts and tighten to secure
INSTALLING FOOT ASSEMBLY
See Figure 6.
Locate the following items:
2 foot supports (12)
6 bolts (13)
NOTE: Block up frame securely with wood blocks to
provide clearance for foot support assembly.
Align foot support with 3 holes in frame cross member.
Insert 3 bolts into welded nuts on foot support.
Tighten bolts to secure
Repeat for second foot.
Fig. 6
Fig. 5