Filter
Top Products
21
Slot
7. With your finger between the lines, wrap
the lines evenly and firmly around the
spool in a clockwise direction.
8. Position the lines in the guide slots.
Guide slot
Guide slot
9. Place the spool in the cover as shown
below.
10. Insert the ends of the lines through exit
holes in the sides of the cover .
Line exit hole
Cover
11. Reinstall the spool and cover onto the
trimmerhead.Push untilcover snapsinto
place.
REPLACING THE TRIMMER HEAD
1. Hold the dust cup with a wrench to keep
theshaftfromturningwhileremovingand
installing trimmer head.
Dust Cup
2. Remove trimmer head by turning counter-
clockwise (looking from bottom of unit).
3. Thread replacement trimmer head onto the
shaft by turning clockwise. Only tighten
hand tight!