7
S Do not attempt cuts starting with the tip of
the b ar (plunge cuts).
S Watch for shifting of wood or other forces that
could close a cut and pinch or fall into chain.
S Use the Reduced--Kickback Guide Bar and
Low--Kickback Chain specified for your unit.
MAINTAIN CONTROL
S Keep a good, firm grip on the pruner with
both hands whenthe engine is running and
don’t letgo. A firm g ripwill helpyou reduce
kickback and maintain control. Keep the
fingers of your left handencircling andyour
left t hum b under the a ssist handle. Keep
your right hand completely around the
throttle handle whether your are right
handed or left handed.
S Stand with your weight evenly balanced on
both feet.
S Standslightly totheleftsideof thepruner to
keep your body from being in a direct line
with the cutting chain.
KICKBACK SAFETY FEATURES
The following features are included on your
pruner to help reduce the hazard of kickback;
however , such features will not t otally eliminate
this da nger . As a pruner user, do not rely only
on sa fet y device s. You must fol l o w all safe t y
precautions, instructions, and maintenance in
this manual to help avoid kickback and other
forces which can result in serious injury.
S Reduced--Kickback Guide Bar, designed
with a small radius tip which reduces the
sizeof thekickback dangerzoneon thebar
tip.
Small RadiusTip
Reduced Kickback Symmetrical GuideBar
SymmetricalGuideBar
Large RadiusTip
S Low--Kickback Chain, designed with a
contoured depth gauge and guard link
which deflect kickback force and allow
wood to gradually ride into the cutter.
Low---Kickback
Chain
Not a Low---Kickback Chain
Can Obstruct Material
Contoured Depth Gauge
Elongated Guard Link
Deflects
kickback force
andallowswood
to gradually ride
into cutter
WARNING: The engine exhaust
from this product contains chemicals known
totheStateofCaliforniatocausecancer,birth
defects or other reproductive harm.
SAFETY NOTICE: Exposure to vibrations
through prolonged use of gasoline powered
hand tools could cause bloodvessel o rnerve
damage in the fingers, hands, and joints of
people prone to circulation disorders or ab-
normal swellings. Prolonged use in cold
weatherhas beenlinkedtobloodvesseldam-
ageinotherwisehealthy people. Ifsymptoms
occur such as numbness, pain, loss of
strength, change in skin color or t exture, or
loss of feeling in the fingers, hands, or joints,
discontinuethe useofthis toolandseekmed-
ical attention. An anti--vibration system does
not guarantee the avoidance of these prob-
lems. Users who operate power tools on a
continual and regular basis must monitor
closely theirphysicalconditionand thecondi-
tion of this tool.
SPECIAL NOTICE: This unit is equipped
with a temperature lim iting muffler and spark
arresting screen which meets the require-
ments ofCalifornia Codes4442and 444 3. All
U.S. forest land and the states of California,
Idaho, Maine, Minnesota, New Jersey , Ore-
gon, and Washington require by law that
many internal combustion engines be
equippedwithasparkarrestingscreen. Ifyou
operateinalocalewheresuchregulations ex-
ist, youare legallyresponsibleformaintaining
theoperating conditionof theseparts. Failure
to do so is a violation of the law. For normal
homeowner use,the mu fflerandsparkarrest-
ing screen will not require any service. After
50 hours of use, we recommend that your
muffler be serviced or replaced by an autho-
rized service dealer.
ADDITIONAL SAFETY RULES
FOR OPTIONAL ATTACHMENTS
WARNING: For each optional at-
tachment used, readentire instruction m anu-
al before use and follow all warnings and in-
structions in manual and on attachment.
WARNING: Ensure handlebar is
installed when using brushcutter attachment.
Attachhandlebar above a rrowon safety label
on theupper shaft (engine endofunit). Ifyour
brushcutter attachment does not include a