Filter
Top Products
9- ENG
D25115
5. Assemble grommet kit and
quick-connect nozzles as
described in instructions sup-
plied.
6. Add engine oil (supplied) to
engine. Refer to engine manual
supplied by engine manufacturer
for correct procedure.
NOTE: There will be a slight amount
of oil in the engine from factory test-
ing.
NOTE: The high pressure pump was
filled with oil at the factory. There is
no need to add oil at this time, see
the Maintenance section of this man-
ual for Maintenance information.
2. Connect wand to gun. Tighten
securely.
3. Attach high pressure hose to gun.
Tighten securely.
ASSEMBLY
1. Place handle assembly onto
frame and connect handle to
frame.