Filter
Top Products
29
OPERATION
Safe Operating Precautions
Starting the Engine
4. Position the engine switch to ON.
5. Lightly pull the starter recoil grip until resistance is felt. Then,
firmly pull straight out.
Do not allow starter grip to snap back
against the generator. Return it gently
to prevent damage to the starter.
6. If the choke lever was positioned to START the engine, gradually
move it to RUN as the engine warms up.
7. After a 2 to 3-minute warm up, select ON or OFF on the SMART
throttle switch as desired.
8. If connecting loads to generator, reference “AC Operation” or “DC
Operation” as outlined later in this section.
9. Make sure to turn the AC switch
to "ON" position. Otherwise,
there will be no AC power
output from AC receptacles.
ON
OFF
AC
Switch