Philips QS6140 Trimmer User Manual


 
4 To switch off the shaving head after use, press the shaving head on/off
button again.
Overload protection
If you press the trimming head or shaving head too hard onto your skin or
if its cutting element gets blocked (e.g. by clothes etc.), the on/off button of
the blocked trimming head or shaving head ashes quickly (QS6160 only)
and the appliance switches off automatically. Remove whatever is blocking
the cutting elements before you use the appliance again.
Cleaning and maintenance
Clean the appliance after every use.
Never use compressed air, scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the appliance.
Only clean the appliance and the adapter with the cleaning brush
supplied.
Note: The trimming head and shaving head do not need any lubrication.
Cleaning the trimming head
1 Switch off the appliance.
2 Pull the comb off the trimming head.
3 Clean the trimming head under the tap.
Cleaning the trimming head connector
Note: Make sure you clean the trimming head connector at least once every
three months.
1 Switch off the appliance.
ENGLISH12