Filter
Top Products
Problem Possible cause Solution
The socket to
which the appliance
is connected is not
live.
Make sure the socket you use is
live. If you use a socket in a
bathroom cabinet, you may
need to switch on the light to
activate the socket.
The appliance is not
switched on.
Switch on the appliance.
You did not attach
the epilating
head correctly.
Place the epilating head on the
appliance and press it onto the
appliance until it snaps home
(‘click’).
Skin irritation
occurs.
You used the
epilator for the rst
time or after a long
period of disuse.
Some skin irritation may occur
the rst few times you use the
appliance. This is absolutely
normal and usually disappears
quickly. For tips to reduce skin
irritation, see the rst section of
chapter ‘Using the appliance’.
Also make sure you keep the
epilating head clean.
You have applied
too much pressure
to the appliance
Do not use any pressure when
moving the appliance over skin
It is not
possible to
remove the
epilating head.
You did not move
the epilating head
in the right
direction.
Press the release button and
move the epilating head in the
direction of the arrow (g. 11)
to remove it.
ENGLISH14