Filter
Top Products
www.petsafe.net 19
The Receiver
Collar is beeping
everywhere.
•Check that the Transmitter is plugged
into a working standard 120-volt outlet,
turned on, the Power Light is on, and the
Transmitter controls are set at your desired
settings.
•Bring Receiver Collar while standing within
5-10 feet of the Transmitter to reset.
•Re-Synchronize the System. (Page 22)
The Receiver
Collar is beeping
but my pet is not
responding to the
Static Correction.
•Make sure the Static Correction Level is set
at 2 or above.
•Test the Receiver Collar with the Test Light.
•If the Test Light flashes, check the fit of the
Receiver Collar.
•Trim your pet’s fur where the Contact
Points touch the neck and/or purchase long
Contact Points by contacting the Customer
Care Center at 1-800-732-2677.
•Increase the Static Correction Level.
•Repeat training steps to reinforce training.