18 1-800-732-2677
Please refer to your PetSafe
®
Wireless Pet Containment System
Operating and Training Guide for a complete list of Frequently Asked
Questions and Troubleshooting or visit www.petsafe.net
Troubleshooting
The Receiver Collar
is not beeping or
administering a
Static Correction.
•Check that the Transmitter is plugged into
a working 120-volt outlet, turned on, the
Power Light is on, and the Transmitter
controls are set at your desired settings.
•Check Receiver battery to make sure it is
installed properly.
•When replacing the battery, do so while
standing within 5-10 feet of the Transmitter.
•Re-Synchronize the System. (Page 22)