Filter
Top Products
6 www.petsafe.net
Receiver Indicator Light: Indicates when the Receiver Collar has been
turned on or off and also serves as a low-battery indicator.
Charging Jacks: For connecting the charger. The Remote Transmitter and
Receiver Collar are waterproof without the charger covers. However, keep the
charger covers in place when not charging to keep debris out of the openings.
Continuous Stimulation: You control when and how long Stimulation is
delivered to your dog through the Receiver Collar’s Contact Points. When a
Continuous Stimulation button is pressed for 8 seconds or more, the Remote
Transmitter will “time-out.” The button will need to be released and pressed
again before additional Stimulation can be delivered.
Positive Tone: Use the Positive Tone as a marker to reinforce positive
behaviour. Again, timing is critical. Praise or treat the dog immediately
following the Positive Tone.
Operating Guide
Prepare the Remote Transmitter
Charge the Remote Transmitter
1. Lift the rubber cover
protecting the Remote
Transmitter Charging Jack.
2. Connect one of the charger
connectors to the Remote
Transmitter Charging Jack.
3. Plug the Universal Charging
Adapter into a standard
household electrical socket,
using the appropriate
adapter plug.
4. Charge the Remote
Charger
connector
placed in the
Handheld
Transmitter
Charging Jack
Transmitter for 5 hours for the first charge. Recharges take
only 3-4 hours.
Note: The Battery Indicator will scroll while charging and will
become solid when fully charged.
5.When charging is completed, replace the rubber cover.
Note: Approximate battery life between charges is 40 to 60 hours,
depending on frequency of use.
Step
1