4
Warnings
Before you begin programming, please read the important
safety warnings below.
•
Never go inside the drive enclosure. The capacitor bank holds a 230 volt charge,
even if there is no power to the unit.
• Do not submerse the IntelliPro VS-3050.
• The IntelliPro VS-3050 is capable of 160 GPM or 104 feet of head. Use caution when
installing and programming to limit pump performance when plumbed with old or
questionable equipment.
• IntelliPro VS-3050 can be wired for constant power, or to the load side of a mechanical
time clock.
• Always stop IntelliPro VS-3050 and disconnect the communication cable before
performing maintenance.
IntelliPro
™
VS-3050 Quick-Start Guide