Filter
Top Products
Warnings and Alarms
If an alarm condition occurs, the pump will stop running and the red LED will ash
continuously to indicate the presence of an alarm. The alarm LED will reset when the
condition clears.
Alarm and Warning Refer to page 33 of the IntelliPro
VS-3050 Installation and User’s Guide for specifications
LED Sequences that should be followed when Alarms or Warnings are indicated.
Drive Temperature Green LED will blink 2 times.
Warning
Alarm Conditions
Unknown Alarm
Drive Temperature
Alarm
Power Out Alarm
Over Current Alarm
Over Voltage Alarm
Green LED will blink 5 times.
Green LED will blink 6 times.
Green LED will blink 7 times.
Green LED will blink 8 times.
Green LED will blink 9 times.
IntelliPro
™
VS-3050 Quick-Start Guide
12