Filter
Top Products
14
English
5. Raising the backrest to the upright position
1
Insert the power plug into the power outlet.
2
Confirm the lock switch key is set to the
“open” position.
3
Confirm the power switch is set to the “on”
position.
4
Press the button on the control panel
twice.
Press once, and then press again approx. 1 second later.
The backrest will rise to the upright position automatically.
•
1
6. Placing the control panel into the control panel stand
1
Fit the groove on the side of the
control panel to the projection on the
inside of the holder.
Put the control panel cord on the outer side of the armrest
before use.
•
Projection on the inside of
the holder
Lift the control panel to remove.