Filter
Top Products
PARTS LIST FOR SWING SET
Main Frame
Name Each
Top Bar with Corner Fittings
and Hooks 2
Leg 6
Support Bar 3
Glider
5
©
2006 Pacific Cycle, Inc.
Name Each
Glider Pole (vertical) with Foot Rests 2
Glider Pole (horizontal) with Seats 2
Glider Frame Attachment 1
Swings and Trapeze
Name Each
Swing Seat with Chains 3
Trapeze 1
Slide
Name Each
Rail/Ladder Leg 2
Front Leg 1
Slide 1
Ladder Step 2
PRE-ASSEMBLED HARDWARE
For easier assembly, Playsafe™ has pre-assembled some of the parts for you. Most of the screws and bolts should already be
in place. If removal of this hardware is required for certain assembly steps, it should be replaced in its original position.
Hardware shown in the assembly steps is actual size.
MAIN FRAME ASSEMBLY
Required Parts:
Top Bar x2 Leg x6
Support Bar x3 Corner Fitting x2 (attached to the top bar)