Filter
Top Products
16
Calling up MIN/MAX values
The minimum and maximum values reached for the indoor and outdoor temperature
and indoor and outdoor humidity since the data were last deleted are saved. For
the wind speed and rainfall measurement, only the MAX values are saved.
For all figures, the date and time that the extreme value occurred are also saved.
The stored data can be called up as follows:
Calling up minimum values
- Press the "MIN/MAX" key once:
The display shows all minimum values in the relevant display fields. "MIN" appears
in the middle of the display. There is no indication for wind and rain.
Calling up maximum values
- Press the "MIN/MAX" key twice:
The display shows all maximum values in the relevant display fields. "MAX" appears
in the middle of the display.
- Press the "MIN/MAX" key again to return to the normal display.
Displaying the time/date for an individual extreme value, deleting the extreme
value
For each individual extreme value you can, if necessary, view the relevant time
and date on which it occurred.
- Select the display of the minimum values (press the "MIN/MAX" key once) or the
maximum values (press the MIN/MAX" key twice).
- Press the "SENSOR" key repeatedly. Now only one display field with its extreme
value will be shown in turn, and underneath in the time display the time and the
date on which it occurred, shown in the following order.
Indoor temperature → Indoor humidity → Outdoor temperature → Outdoor
humidity → Rainfall (MAX only, not in the case of TOTAL) → Wind speed (MAX
only)
- Press the key once more to return to the complete display of all extreme values
(MIN or MAX).
Deleting MIN/MAX values
- If the individual extreme values are called up as described above, you can delete
each of them in turn by pressing and holding the "RAIN" key down.