Filter
Top Products
8
EN
CLOCK / CALENDAR
To manually set the clock:
(You only need to set the clock and calendar if you have
disabled the clock radio reception.)
1. Press
SELECT
to navigate to the Clock Area.
will show next to the Area.
2. Press and hold
MODE
to change the clock setting.
The setting will blink.
3. Rotate the dial left or right to decrease or increase
the setting value.
4. Press
MOD
E to confi rm.
5. Repeat steps 1 to 5 to set the time zone offset
hour (+ / -23 hours), 12 / 24 hour format, hour,
minute, year, date / month format, month, date and
weekday language.
NOTE
If you enter +1 in the time zone setting, this will
give you your regional time plus 1 hour.
NOTE
The weekday is available in English, French,
German, Italian or Spanish.
To change the clock display:
1. Press
SELECT
to navigate to the Clock Area.
will show next to the Area.
2. Press
MODE
to toggle between:
• Clock with Seconds
• Clock with Weekday
• Calendar
CLOCK ALARM
The clock has 2 alarms that can be set to sound with
a beep.
ICON
MEANING
Al
arm 1 or 2 is displayed
Ala
rm 1 or 2 is activated
No
icons No alarm is set
To set an alarm:
1. Press
SELECT
to navigate to the Clock Area.
will show next to the Area.
2. Press
ALARM
to toggle between alarm 1
alarm 2
display.
3. When you’ve selected the alarm you wish to
change, press and hold
ALARM
. The alarm setting
will blink.
4. Rotate the dial left or right to change the setting.
5. Press
ALARM
to confi rm.
To activate / deactivate an alarm:
1. Press
SELECT
to navigate to the Clock Area.
will show next to the Area.
2. Press
ALARM
to toggle between alarm 1
and
alarm 2
3. Press
MEMORY /
to activate or
deactivate the alarm.
appears when the
alarm is activated.
MOON PHASE
The Calendar must be set for this feature to work (see
Clock / Calendar section).
ICON
DESCRIPTION
New
moon
Wa
xing crescent
Fir
st quarter
W
axing gibbous
Ful
l moon
W
aning gibbous
Th
ird quarter
W
aning crescent
AUTO SCANNING FUNCTION
To activate the outdoor temperature and humidity
auto-scan function:
1. Press
SELEC
T to navigate to the Temperature or
Humidity Area.
will show next to the Area.
2. Press and hold
MODE
to activate auto-scan. The
temperature and humidity display will scroll from
indoor to ch1 through to ch10.
3. Pr
ess
MEMORY /
ON/OFF
or
MODE
or
ALARM
to stop the auto-scan.
NOTE
Channel 1 is used for the outdoor temperature
and humidity sensor in the remote wind sensor.
Additional temperature and humidity sensors can use
other channels.
WEATHER FORECAST
The weather display in the top part of the screen shows
the current weather and the weather forecast for the next
12-24 hours within a 30-50 km (19-31 mile) radius.
Weather Forecast Area
ICON DESCRIPTION
Sun
ny
Partly
cloudy
WMR100_EN_86L4515-017.indd 8 6/15/06 4:26:18 PM