Filter
Top Products
USER MANUAL
8 33014815(1)2005-07 A
ENVIRONMENTAL CONDITIONS
Working
The machine should only be used in a suitable environment.
The work environment should be well-lit, should present no
danger of explosions and should be protected from bad
weather conditions.
The machine functions correctly within the following
environmental conditions:
Temperature: +10°C ÷ +40°C.
Humidity: 30% ÷ 95% non-condensed.
Storage
When not in use, the machine should be stored indoor and
protected from bad weather conditions.
Temperature: +1°C ÷ +50°C.
Humidity: maximum 95% non-condensed.
NOISE LEVEL
Measurements were taken in the workplace and around the
machine at a distance of 1 m and at a height of 1.6 m from the
floor level under working conditions.
If the machine is used according to the instructions, the
vibrations do not cause dangerous situations.
The machine vibration level is below 2.5 m/s².
USE
CONTROLS AND INSTRUMENTS
Without headlights
(See Fig. H)
1. Joystick
2. Hopper overheating buzzer (optional)
3. Fuse board
4. Accelerator lever
5. Parking brake lever
6. Ignition switch
7. Warning light instrument panel
8. Drive pedal
9. Suction fan switch
10. Horn switch
11. Brake pedal
12. Water pump switch (optional)
With headlights
(See Fig. I)
1. Joystick
2. Hopper overheating buzzer (optional)
3. Fuse board
4. Accelerator lever
5. Parking brake lever
6. Ignition switch
7. Warning light instrument panel
8. Drive pedal
9. Suction fan switch
10. Warning switch
11. Brake pedal
12. Combination switch
13. Water pump switch (optional)
WARNING!
The machine should be used ONLY by
qualified personnel who know all the machine
controls.
NOTE
Before starting the machine, check the seat
sensor operation: without the operator, the
engine should immediately stop.