Filter
Top Products
12
english
1)
Options / model variants
POSEIDON 5
,
6.3 Rolling up the electrical
lead and storing
accessories
Risk of tripping!
To prevent accidents, always
carefully roll up the electrical
lead.
1. Wind up the high pressure
hose as illustrated.
2. Place the spray lance into
the spray lance storage.
6.4 Storing the cleaner
(below 0°C)
1. Store the cleaner in a dry
room without danger of frost
or protect as below:
CAUTION!
If the high-pressure cleaner is
stored in a room with tempera-
tures around or below 0°C, anti-
freeze should be drawn into the
pump beforehand:
1. Remove the water inlet hose
from the cleaner.
2. Remove the spray lance.
3. Switch on the cleaner with
the main switch in position „
I“ and activate trigger on the
spray gun.
Switch off the cleaner after
max. 3 minutes.
4. Connect the suction hose to
the water inlet of the cleaner
and place it in a tank contain-
ing anti-freeze.
5. Switch on the cleaner with
the main switch in position „
I „.
6. Hold the spray gun over the
tank containing anti-freeze
and operate it to start suc-
tion.
7. During suction operate the
spray gun two or three times.
8. Lift the suction hose from the
tank containing anti-freeze
and operate the spray gun to
pump off the remaining anti-
freeze.
9. Switching off the cleaner
10.To avoid any risks, store
the cleaner temporarily in a
heated room before using it
again.
7 Maintenance
7.1 Maintenance plan
Weekly
After the first 50
operating hours
Every six months
or 500 operating
hours
As
required
7.2.1
Cleaning water inlet filter
QQ
7.2.2
Checking pump oil level
Q
7.2.3
Changing pump oil
QQ