Filter
Top Products
Photography
When using the NZT1-M2 for photography, you are not
supposed to obtain the same quality of pictures as taken in the
daytime. But you will have the possibility to get an image of
the object that normally could not be seen in the dark by the
naked eye.
The user has a wide range of possibilities for experiments in
the photography field by selecting different photo materials and
changing of optics. Quality of pictures taken with a new lens
or eyepiece may be estimated approximately by the object’s
image when observing through the view-finder of your SLR
cameral.
8. TROUBLESHOOTING
The scope does not work.
Check that the batteries are installed properly.
Check the charge of the batteries. Replace if they are weak. Do not
use old batteries with new ones.
The image does not appear in focus.
Bring the inspected object to the center of the image. Turning
the eye-piece (9) adjust to achieve the clearest image on the
screen. Then obtain the most clear-cut image of the object
focusing with ring,(5). Repeat the steps of focusing if
necessary
If the view still does not seem in focus, clean the lenses; they
could be foggy or dusty.14
3. COMPONENTS
NZT1-M2 is supplied with the following components:
NAME QUANTITY
NZT1-M2 unit 1
Case 1
Carrying strap 1
Lens caps 1
AP-7 I/R illuminator 1
AP-7 lens cover 1
Tripod doubler 1
Lens cloth 1
Camera adapter 1
Byonet adapter (optional) 1
Manual 1
Warranty Registration Card 1