Newcon Optik NZT1-M2 Telescope User Manual


 
11. ACCEPTANCE CERTIFICATE
NIGHT VISION DEVICE
Serial Number _______________________________
Model _NZT-1M2_____________________________
corresponds to technical conditions ADSH 3.807.020 TU and
is admitted for use.
Date of production -____________________
Place for seal
Quality inspector ____________________
(signature)
18
NEVER disassemble the unit. This device
contains high voltage, which may be hazardous
to your health!
NEVER expose the opened objective lens of an
active unit in daylight. (Note: 1st generation
units will still remain active for a few minutes
after switching the unit off). At daytime
objective lens must be covered by caps. There
is a tiny hole in the cap to provide enough light
for day time operation. It is allowed to turn on
the unit at daytime, but the lenses must be
covered by caps.
NEVER aim active unit at intense light sources
(i.e. lights, headlamps, campfires, the moon,
etc.)
NEVER reverse the polarity of a battery
NEVER connect the unit to external power
sources
ALWAYS remove batteries when not in use for
a long period
3