Filter
Top Products
FULL OR PARTIAL BALE-EJECT™ SYSTEM
For easy cleaning out of the baler after finishing a
day’s work, the standard Bale-Eject™ system fully
clears the bale chamber of any remaining crop.
Two rails in the bottom of the bale chamber,
each with 4 tines, operated by hydraulics with a
dedicated control lever at the rear of the baler, eject
the entire bale completely from the bale chamber.
Allowing ejection of only the completed bale and
leaving the start of the next bale in the chamber, is
made possible with the optional dealer installed
accessory partial Bale-Eject™ system which can be
added to the standard full Bale-Eject™ system.
Separate pushing teeth on each side of the
chamber are activated by separate hydraulics. By
leaving a number of wads inside the bale chamber,
the start off of the next bale is much faster for
increased in-field productivity.