Filter
Top Products
NI 5441 Specifications 2 ni.com
Arbitrary Waveform Generation Mode ...................................................25
Function Generation Mode ......................................................................28
Onboard Signal Processing......................................................................29
Calibration ...............................................................................................38
Power .......................................................................................................38
Software...................................................................................................39
Environment ............................................................................................40
Safety, Electromagnetic Compatibility, and CE Compliance .................41
Physical....................................................................................................42
Technical Support Resources ..................................................................43
CH 0
(Channel 0 Analog Output, Front Panel Connector)
Specification Value Comments
Number of
Channels
1 —
Connector SMB (jack) —
Output Voltage Characteristics
Output Paths 1. The software-selectable Main Output Path setting
provides full-scale voltages from 12.00 V
pk-pk
to
5.64 mV
pk-pk
into a 50 Ω load. NI-FGEN uses either the
Low-Gain Amplifier or the High-Gain Amplifier when
the Main Output Path is selected, depending on the Gain
attribute.
2. The software-selectable Direct Path is optimized for
IF applications and provides full-scale voltages from
1.000 V
pk-pk
to 0.707 V
pk-pk
.
—
DAC
Resolution
16 bits —