Filter
Top Products
9
ASSEMBLYASSEMBLY
Step 7
Step 8
NOTE: Assembly of this heater requires
basic mechanical skills. Proper assembly
is the responsibility of the installer.
Step 7 ----
Connect Gas Line to Cylinder
Step 8 ----
Check for leak
Attach Gas hose to regulator with
3/8 Inch Open End Wrench and
Adjustable Wrench.
Attach regulator to cylinder. Tighten securely.
Move cylinder to the plate of base assembly.
Your Patio Heater has been checked at all
factory connections for leaks, To check the
Connection of the gas hose/regulator/cylinder.
1) Make leak solution by mixing 1part liquid
dish soap and 3 parts water.
2) Spoon several drops (or use squirt bottle)
of the solution onto the gas hose/regulator
and regulator/cylinder connection.
3) Inspect the connections and look for bubbles.
4) If no bubbles appear, the connection is safe.
5) If bubble appear, there is leak, loosen and
re-tighten this connection.