Filter
Top Products
OPERATION
6
F-031061C
Know your snow blower and its controls. Be sure you (or any other operator) have read and understood the Operation Precautions
listed on page 3 of this manual. This Snowthrower conforms to applicable North American safety standards.
Key Lock/Key
Upper Handle
Tube
Bottom Handle
Tube
Motor Housing
Power Cord
Connector
Strain Relief
Discharge
Control Rod
Lower Handle
Grip
Directional Discharge
Chute
Impeller Blades
2 Blade Aluminum Impeller
Control Bar
Figure 6
The Operation of any Snowthrower can result in foreign objects thrown into the eyes, which
can result in severe eye damage. Always wear safety glasses or eye shields before starting
your Snowthrower and while operating. We recommend Wide Vision Safety Mask for over
the spectacles or standard safety glasses, available at your authorized service dealer.
SNOW THROWER OPERATING CONTROLS
KEYLOCK – Key must be inserted and rotated for operation.
Remove key when not in use.
CONTROL BAR – Squeeze control bar for operation, release
control bar to stop operation.
STRAIN RELIEF – To attach extension cord so cord will not
stress power cord connector.
DISCHARGE CONTROL ROD – Pull and rotate to direct snow
discharge, release and the control rod will lock into position.
IMPELLER BLADES – When operating Snowthrower impeller
blades spin to discharge snow. Replace blades when worn or
damaged.