Filter
Top Products
TLW-300SS DC WELDER/ AC GENERATOR— OPERATION AND PARTS MANUAL— REV. #2 (04/07/10) — PAGE 29
Welding Cables and Polarities
Connect the welding cables (Figure 11) to the welder's output
terminals located on the control panel. The output terminals
have (+) and (-) polarities. Select the appropriate polarities
according to the application (See Welding Applications,
Table 12).
TLW-300SS— WELDER OPERATING INSTRUCTIONS
NOTE
ALWAYS attach terminal connectors at
the end of each cable. NEVER connect
exposed or frayed wires (Figure 12)
directly to the terminals. Exposed wiring
may cause shocks or di-electric
breakdown from poor contact.
Figure 11. Electrode Cable Connection
(Correct)
Figure 12. Electrode Cable Connection
(Incorrect)
snoitacilppAgnidleW.21elbaT
YTIRALOPDOHTEMGNIDLEWSNOITACILPPALACIPYT
ytiraloPthgiartS
)+(
...
pmalCdnuorG
)lateMesaB(
larenegrofslairetamleetsgnidleW
.setalpssenkcihtdna,serutcurts
redloHedortcelE...
)-(yollareppocrofgnidlewcrA
ytiraloPesreveR
redloHedortcelE...)+(
fognidlewcra,gnidlewpu-dliuB
setalpniht
)
+(
...
pmalCdnuorG
)lateMesaB(
leetssselniatsfognidlewcrA