Filter
Top Products
PAGE 28 — DCA-220SSVU (50 Hz) — OPERATION AND PARTS MANUAL — REV. #0 (04/18/06)
DCA-220SSVU (50 HZ) — GENERATOR OUTPUTS
Generator Amperage
Tables 8 describes the generator’s current output capability
for 3Ø phase applications.
Generator Output Voltages
A wide range of voltages are available to supply voltage for
many different applications. Voltages are selected by apply-
ing jumpers (6) to the
voltage change-over board
(Figure 15).
To obtain some of the voltages as listed in Table 6 (see
below) will require a fine adjustment using the
voltage regu-
lator
(VR)
control knob
located on the control panel.
Voltage Change-Over Board
The
voltage change-over board
(Figure 15) is located on
the control box, behind the generator control panel. This
board has been provided for ease of voltage selection.
CAUTION - CHANGING VOLTAGES
NEVER attempt to place jumper plates on the
voltage
change-over board
while the generator is in operation.
There exist the possibility of
electrocution, electrical
shock or burn, which can cause severe bodily harm
or even death
!
Maximum Amps
Table 9 shows the
maximum
amps the generator can pro-
vide. DO NOT exceed the maximum amps as listed.
Figure 15. Voltage Change-Over Board
sgnitaRerepmArotareneG.8elbaT
⎯⎯
⎯
⎯⎯
3
∅∅
∅
∅∅
WKV002V004
022763
0444127
06612801
08882441
001063081
021334612
041505252
061675882
elbaliavAsegatloV.7elbaT
esahPeerhT
V002V022V042V614V044
esahPelgniS
V511V721V931V042V452
spmAmumixaMrotareneG.9elbaT
ledoMUVSS022ACD
egatloVdetaRspmAmumixaM
esahPelgniS
tloV001
)eriw4(spma335
esahPe
lgniS
tloV002
)eriw4(spma662
esahPeerhT
tloV002
spma775
esahPeerhT
tloV004
spma882