MTD LT31CS Trimmer User Manual


 
3
This Symbol Points Out Important Safety Information Which, If Not Followed, Could Endanger The Personal
Safety And/or Property Of Yourself And Others. Read And Follow All Instructions In This Manual Before
Attempting To Operate Your Cultivator. Failure To Comply With These Instructions May Result In Personal
Injury. When You See This Symbol–Heed Its Warning.
SAFETY ALERT SYMBOL: Indicates danger, warning, or caution. Attention is required in order to avoid
serious personal injury. May be used in conjunction with other symbols or pictographs.
NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment.
DANGER: Failure to obey a safety warning will result in serious injury to yourself or to others. Always follow
the safety precautions to reduce the risk of fire, electric shock, and personal injury.
WARNING: Failure to obey a safety warning can result in injury to yourself and others. Always follow the
safety precautions to reduce the risk of fire, electric shock, and personal injury.
CAUTION: Failure to obey a safety warning may result in property damage or personal injury to yourself or to
others. Always follow the safety precautions to reduce the risk of fire, electric shock, and personal injury.
READ ALL INSTRUCTIONS
BEFORE OPERATING
Read the instructions carefully. Be familiar with the
controls and proper use of the unit.
Do not operate this unit when tired, ill, or under the
influence of alcohol, drugs, or medication.
Children and teens under the age of 15 must not
use the unit, except for teens guided by an adult.
Inspect the unit before use. Replace damaged parts.
Check for fuel leaks. Make sure all fasteners are in
place and secure. Replace cutting head parts that are
cracked, chipped, or damaged in any way. Make sure
the cutting head is properly installed and securely
fastened. Be sure the cutting head guard is properly
attached, and positioned as recommended. Failure to
do so can result in personal injury to the operator and
bystanders, as well as damage to the unit.
Use only 2.41 mm (0.095 inch) diameter original
equipment replacement line. Never use metal-
reinforced line, wire, or rope, etc. These can break
off and become a dangerous projectile.
Be aware of risk of injury to head, hands, and feet.
•Clear the area to be cut before each use. Remove
all objects such as rocks, broken glass, nails, wire,
or string which can be thrown or become entangled
in the cutting head.
•Clear the area of children, bystanders, and pets. At
a minimum, keep all children, bystanders and pets
outside a 15 meters (50 ft.) radius; there still may be
a risk to bystanders from thrown objects.
Bystanders should be encouraged to wear eye
protection. If you are approached, stop the engine
and cutting head immediately.
Squeeze the throttle control and check that it returns
automatically to the idle position. Make all adjustments
or repairs before using unit.
SAFETY WARNINGS FOR PETROL TRIMMERS
WARNING: Petrol (gasoline) is highly flammable,
and its vapors can explode if ignited. Take the
following precautions:
Store fuel only in containers specifically designed
and approved for the storage of such materials.
Always stop the engine and allow it to cool before
filling the fuel tank. Never remove the cap of the fuel tank,
or add fuel, when the engine is hot. Never operate the unit
without the fuel cap securely in place. Loosen the fuel tank
cap slowly to relieve any pressure in the tank.
Add fuel in a clean, well-ventilated area outdoors where there
are no sparks or flames. Slowly remove the fuel cap only
after stopping engine. Do not smoke while fueling or mixing
fuel. Wipe up any spilled fuel from the unit immediately.
•Avoid creating a source of ignition for spilled fuel.
Do not start the engine until fuel vapors dissipate.
Move the unit at least 9.1 m (30 feet) from the fueling
source and site before starting the engine. Do not
smoke, keep sparks and open flames from the area
while adding fuel or operating the unit.
WHILE OPERATING
Never start or run the unit inside a closed room or
building. Breathing exhaust fumes can kill. Operate this
unit only in a well-ventilated area outdoors.
Wear safety glasses or goggles and ear/hearing protection
when operating this unit. Wear a face or dust mask if the
operation is dusty. Long sleeve shirts are recommended.
SECTION 1: IMPORTANT SAFE OPERATION PRACTICES