Filter
Top Products
9
• Insert the upper end of the chute tube into the hole
in the cover assembly, then insert the extension
tube between the discharge chute and the chute
tube. See Figure 6.
• Secure by placing the ends of the retainer straps on
the discharge chute over the clips on the chute
tube.
SECTION 5: OPERATION
Grass Bag Removal
• To open the cover, simply lift up on cover. The
chute tube assembly does not have to be removed.
• To remove the grass bags, lift up on bag and
unhook the frame of the bag from the support tube
assembly. See Figure 7A.
• To empty the grass, use the handle which is
provided on the bottom of each bag.
See Figure 7B.
NOTE: Under normal usage, the grass collector is
subject to wear and should be checked periodically. Be
certain any replacement bag complies with the mower
manufacturer’s recommendation. Wash grass bag
periodically with water. Allow to air dry. Do not use heat.
Figure 7
A
B