Filter
Top Products
5
corners, doorways, shrubs, trees or other
objects that may block your vision of a child
who may run into the machine.
f. Disengage the cutting blade(s) before
shifting in reverse. The “No-Cut-In
Reverse” feature is a reminder not to cut in
reverse and to help avoid back over
accidents. Do not defeat it.
g. Keep children away from hot or running
engines. They can suffer burns from a hot
muffler.
h. Remove key when machine is unattended
to prevent unauthorized operation.
9. Never allow children under 14 years old to
operate the machine. Children 14 years old and
over should read and understand the operation
instructions and safety rules in this manual and
should be trained and supervised by a parent.
TOWING
1. Tow only with a machine that has a hitch
designed for towing. Do not attach towed
equipment except at the hitch point.
2. Follow the manufacturers recommendation for
weight limits for towed equipment and towing on
slopes.
3. Never allow children or others in or on towed
equipment.
4. On slopes, the weight of the towed equipment
may cause loss of traction and loss of control.
5. Travel slowly and allow extra distance to stop.
6. Do not shift to neutral and coast downhill.
GENERAL SERVICE:
1. Never run an engine indoors or in a poorly
ventilated area. Engine exhaust contains carbon
monoxide, an odorless, and deadly gas.
2. Before cleaning, repairing, or inspecting, make
certain the blade(s) and all moving parts have
stopped. Disconnect the spark plug wire and
ground against the engine to prevent unintended
starting.
3. Periodically check to make sure the blades come
to complete stop within approximately (5) five
seconds after operating the blade
disengagement control. If the blades do not stop
within the this time frame, your unit should be
serviced professionally by an authorized MTD
Service Dealer.
4. Check brake operation frequently as it is
subjected to wear during normal operation.
Adjust and service as required.
5. Check the blade(s) and engine mounting bolts at
frequent intervals for proper tightness. Also,
visually inspect blade(s) for damage (e.g.,
excessive wear, bent, cracked).
Replace the blade(s) with the original equipment
manufacturer’s (O.E.M.) blade(s) only, listed in
this manual. “Use of parts which do not meet the
original equipment specifications may lead to
improper performance and compromise safety!”
6. Mower blades are sharp. Wrap the blade or wear
gloves, and use extra caution when servicing
them.
7. Keep all nuts, bolts, and screws tight to be sure
the equipment is in safe working condition.
8. Never tamper with the safety interlock system or
other safety devices. Check their proper
operation regularly.
9. After striking a foreign object, stop the engine,
disconnect the spark plug wire(s) and ground
against the engine. Thoroughly inspect the
machine for any damage. Repair the damage
before starting and operating.
10. Never attempt to make adjustments or repairs to
the machine while the engine is running.
11. Grass catcher components and the discharge
cover are subject to wear and damage which
could expose moving parts or allow objects to be
thrown.
For safety protection, frequently check
components and replace immediately with
original equipment manufacturer’s (O.E.M.) parts
only, listed in this manual. “Use of parts which do
not meet the original equipment specifications
may lead to improper performance and
compromise safety!”
12. Do not change the engine governor settings or
over-speed the engine. The governor controls the
maximum safe operating speed of the engine.
13. Maintain or replace safety and instruction labels,
as necessary.
14. Observe proper disposal laws and regulations for
gas, oil, etc. to protect the environment.
WARNING: YOUR RESPONSIBILITY
Restrict the use of this power machine to
persons who read, understand and
follow the warnings and instructions in
this manual and on the machine.
NOTE: Safety label found on your unit
DO NOT OPEN THIS
COVER UNLESS THE
ENGINE IS SHUT OFF
.