Filter
Top Products
Controls & Features
4
11
Clutch Control
Gear Selection
Handle
Handle Adjustment
Lock
Depth Stake
Engine Controls
See the separate Engine Operator’s Manual for information and
functions of the engine controls.
Gear Selection Handle
The gear selection handle is located on the front of the handle
assembly. It is used to select NEUTRAL, REVERSE, or one of the
FORWARD modes.
Clutch Control
The clutch control is located beneath the handle. Squeezing the
clutch handle against the handle engages the wheel and tine
drive mechanisms.
Depth Stake
The depth stake controls the tilling depth.
Handle Adjustment Lock
The handle may be adjusted to the height desired by unlocking
the Handle Adjustment Lock, then moving the handle bars to
the desired position and then re-locking the Handle Adjustment
Lock.