Filter
Top Products
7
ASSEMBLY
NOTE: Assembly of this heater requires
basic mechanical skills. Proper assembly
is the responsibility of the installer.
Step 3 ----
Attach Head Assembly to Post
Load head assembly by inserting gas hose
into post.
Insert head assembly into post.
Tighten securely using M4 X 8 Bolts (5 pcs)
and 4mm washers (5 pcs).
Step4 ----
Attach Double Threaded Bolts to
Attach M6 X 70 double threaded bolts (3 pcs) and
6mm washers (3 pcs) to the top of head assembly
and tighten the bolts securely.
Head Assembly
Step 3
Step 4
3
5
3
13
16
10
12
4