Filter
Top Products
15
TROUBLESHOOTING
PROBLEM PROBABLE CAUSE SOLUTION
Pilot will not light Gas valve may be OFF Turn the gas valve ON
Orifice blocked Clean or replace orifice
Air in supply system
Loose connection Check all fittings
Pilot will not stay on Debris around pilot Clean dirty area
Loose connection Tighten connection
Thermocouple bad Replace thermocouple
Gas leak in line Check connections
Burner will not light Pressure is low
Orifice blocked Remove, clean and replace
Control valve not ON Turn valve to ON
Thermocouple is bad Replace thermocouple
Pilot light assembly bent
Place pilot in proper
or not in correct location
position and retry
Fuel T empty Refill LP gas tankank
Lack of fuel pressure Fuel tank is near empty
Supply pressure is not enough
Dead battery Replace battery
Purge air from lines, with knob
in pilot position, depress and
hold in, to release air.