Filter
Top Products
37
Check the hole for the target. If it is not in
the hole, place the detector on the ground
with the coil flat, pick up a handful of soil
and pass it over the coil. Be sure not to wear
rings, bracelets or a watch which will produce
a signal. Repeat this procedure until the
target is located.
Ensure that no other targets remain, then
refill the hole. All soil and portions of grass
on the plastic sheet should be returned
to the hole as neatly as possible. Step lightly
on the soil to compact it.
Leaving holes, or a scarred area may result
in action being taken to prevent the use
of metal detectors. Please ensure that you
leave an area of ground as it was found.
Try to take all rubbish.