Filter
Top Products
22
Back Light of the Display
When the AC to DC adapter is used the display back light is
always on. When only the backup battery is used to power your
74-200, pressing and releasing the “SNOOZE” button will turn on
the back light for about 5 seconds.
Button press Beeps
When a button is pressed with the “Max / Volume / Off” switch
ON, the 74-200 emits a beep sound. One beep represents that the
74-200 has received a command and has taken effective action.
Two beeps represents the command is not valid (wrong button
pressed) and no action is taken.
TROUBLESHOOTING
Problem Suggestion(s)
No power. Ensure that the wall power
adapter is connected to AC
power, that the cord to the radio
is securely seated in the radio
and that a fresh back-up battery
is installed (if AC power has
failed).
No sound. Check VOLUME setting
No weather broadcast when
you press WEATHER
Ensure that telescoping antenna
is fully extended.