Filter
Top Products
PLACEMENT
• The remote sensor should be placed under eaves or a similar location with free air circulation,
sheltered from direct sunlight and extreme weather.
• Ideally, place the remote sensor over soil, rather than asphalt, which would cause false
readings.
• Avoid placing the remote sensor near sources of heat, such as chimneys and heating elements.
• Avoid areas that collect heat from the sun and radiate heat, such as metal, brick or concrete
structures, paving, and patios.
• The international standard for the valid air temperature measurements is 4 feet (1.25meters)
above the ground.
OPERATION
Immediately after batteries are installed, the remote sensor will start transmitting a temperature
and humidity data to the main unit.
MAIN UNIT
FEATURES
TIME
• Precise time and date set via signals from the US Atomic clock
• 12 or 24 hour time format
• Manual adjustment of time and date
• Calendar displays in date with month format
• Weekday abbreviation in 7 languages English, German, French, Italian, Spanish,
Dutch and Swedish
• Dual crescendo alarms with snooze
• Programmable ice warning alarm
TEMPERATURE AND HUMIDITY
• User-defined high/ low temperature alarm
• Indoor/ outdoor temperature and humidity in up to 3 remote locations (additional sensors
required)
• Comfort level indicators (wet, comfort, dry)
• Minimum and maximum memories of temperature and humidity
• Auto scanning mode – 3 channels of outdoor readings will be displayed one by
one automatically
5