McCulloch MCT203A22 Trimmer User Manual


 
2 3
PLEASE READ
Dear Customer,
Thank you for purchasing a McCulloch product. With proper operation and maintenance, it will provide you with years of serv-
ice.
In order to make the best use of your investment, be CERTAIN to familiarize yourself with the contents of the ENTIRE user
manual before attempting to operate and maintain your unit.
Be sure to carefully follow the step-by-step instructions in this manual to start, operate and maintain your new product.
In the manual there will be the following call-outs: NOTE:, WARNING / CAUTION and WARRANTY.
A NOTE: is used to convey additional information, to highlight a particular explanation, or to expand a step description.
A WARNING or CAUTION identifies a procedure which, if not undertaken or if improperly done, can result in serious person-
al injury and/or damage to the unit.
The
(W
ARRANTY SYMBOL)
ser
ves notice that unless instructions or procedures are followed, any damage caused will
void the warranty and repairs will be at owner’s expense.
\Pay particular attention to the safety precautions. They are written for your protection and contain important information you
must know to safely operate your hedge trimmer.
FOR WARRANTY OR SERVICE CONTACT THE NEAREST McCULLOCH AUTHORIZED SERVICE CENTER - LOCATE YOUR
NEAREST SERVICE CENTER BY CALLING THE TOLL FREE NUMBER IN THIS MANUAL.
INTRODUCTION 1 - GENERAL INFORMATION
Blade
Safety Guard
Front Handle
Safety Switch
Trigger Switch
Rear Handle
Cord Retainer
SPECIFICATIONS
Model NO. . . . . . . . . . . . . .MCT203A16 . . . . . . . . . .MCT203A18 . . . . . . . . .MCT203A20 . . . . . . . . .MCT203A22
Input . . . . . . . . . . . . . . . . . .120V~, 60Hz,2.6 Amp . .120V~, 60Hz,2.8 Amp .120V~, 60Hz,3.0 Amp .120V~, 60Hz,3.2 Amp
No Load Speed . . . . . . . . .3,200 S.P.M. . . . . . . . . . .3,200 S.P.M. . . . . . . . . .3,200 S.P.M. . . . . . . . . .3,200 S.P.M.
Blade Length . . . . . . . . . . .16” (400mm) . . . . . . . . .18” (450mm) . . . . . . . . .20” (500mm) . . . . . . . . .22” (550mm)
Max. Cutting Diameter . . . .1/2” (14mm) . . . . . . . . . .1/2” (14mm) . . . . . . . . .1/2” (14mm) . . . . . . . . .1/2” (14mm)
Net Weight . . . . . . . . . . . . .2.9 kg (6.4 Lbs) . . . . . . .3.0 kg (6.6 Lbs) . . . . . .3.1 kg (6.8 Lbs) . . . . . .3.2 kg (7.0 Lbs)