Filter
Top Products
Rotary Lawnmower Owners Manual
Safety
Operation
Assembly
Maintenance
Model No. M46
WARNING • PLEASE READ
For your own safety please read this manual before attempting to operate your new unit.
Failure to follow instructions can result in serious personal injury. Spend a few moments to
familiarize yourself with your mower before each use.
9096-305209
Model No. M46
AU
8
PREPARING THE ENGINE
Please read and understand the engine instructions prior to operating the lawnmower.
OIL – SAE30
Four stroke (cycle) engines are shipped without oil. Place the mower on a level position,
unscrew the ‘OIL FILL’ cap and slowly pour oil provided into the sump. Fill to the full mark on
the dipstick. The capacity is approximately 500ml. To check engine oil level first unscrew the
oil tank cap and wipe excess oil off. Insert cap into oil filler but DO NOT screw in. Remove
cap and observe oil level on dip stick. NOTE: There may be a small amount of oil in the
engine after draining. Fill using dip stick to avoid over lling.
CHANGING THE ENGINE OIL.
FOUR STROKE ENGINES should be checked for oil level every 8 hours running (or daily),
and the oil should be drained and replaced after every 50 hours of use.
See Engine Lubrication section for oil change information.
AU
8
PREPARING THE ENGINE
Please read and understand the engine instructions prior to operating the lawnmower.
OIL – SAE30
Four stroke (cycle) engines are shipped without oil. Place the mower on a level position,
unscrew the ‘OIL FILL’ cap and slowly pour oil provided into the sump. Fill to the full mark on
the dipstick. The capacity is approximately 500ml. To check engine oil level first unscrew the
oil tank cap and wipe excess oil off. Insert cap into oil filler but DO NOT screw in. Remove
cap and observe oil level on dip stick. NOTE: There may be a small amount of oil in the
engine after draining. Fill using dip stick to avoid over filling.
CHANGING THE ENGINE OIL.
FOUR STROKE ENGINES should be checked for oil level every 8 hours running (or daily),
and the oil should be drained and replaced after every 50 hours of use.
See Engine Lubrication section for oil change information.
CAUTION
DO NOT START your four-stroke engine before making sure that it has been
filled with the right amount of the correct grade of oil.
Fig. 2
Fig. 3
Oil Fill
FULL
AU
8
PREPARING THE ENGINE
Please read and understand the engine instructions prior to operating the lawnmower.
OIL – SAE30
Four stroke (cycle) engines are shipped without oil. Place the mower on a level position,
unscrew the ‘OIL FILL’ cap and slowly pour oil provided into the sump. Fill to the full mark on
the dipstick. The capacity is approximately 500ml. To check engine oil level first unscrew the
oil tank cap and wipe excess oil off. Insert cap into oil filler but DO NOT screw in. Remove
cap and observe oil level on dip stick. NOTE: There may be a small amount of oil in the
engine after draining. Fill using dip stick to avoid over filling.
CHANGING THE ENGINE OIL.
FOUR STROKE ENGINES should be checked for oil level every 8 hours running (or daily),
and the oil should be drained and replaced after every 50 hours of use.
See Engine Lubrication section for oil change information.
CAUTION
DO NOT START your four-stroke engine before making sure that it has been
filled with the right amount of the correct grade of oil.
Fig. 2
Fig. 3
Oil Fill
FULL
CAUTION
DO NOT START your four-stroke engine before making sure that it has been
lled with the right amount of the correct grade of oil.